22
USER CODES / CARDS FOR OUTPUT 1 & 2 (Locations 10 & 20)
Total 1,100 User Codes / Cards are available for controlling of the two outputs.
LOCATIONS MEDIA USER ID CARD / USER CODE VALIDATION
(1) LOCATIONS (User Groups)
– Group 1 – 1,000 User Codes / Cards for controlling Output 1
– Group 2 – 100 User Codes / Cards for controlling Output 2
(2) MEDIA (Operation Media)- please also see page
13
for more information of their security level
– Cards Only – 125Khz Proximity EM Card
– User Codes Only – 4-8 Digits
– Cards + Secondary User Code(s) –
See Note (a)
– Cards + Common User Code –
See Note (b)
– Delete Cards / User Codes from the selected User ID –
See Note (c)
– Group Clearing. Clear all the User Codes & Cards of the selected User Group
(3) USER ID (The IDs of The User Codes and Cards)
–
– 1,000 User IDs for the User Codes & Cards in User Group 1 (Output 1)
–
– 100 User IDs for the User Codes & Cards in User Group 2 (Output 2)
(4) CARD / USER CODE
Read EM Card
or
key in User Code
into each assigned User ID.
(5) VALIDATION
Press the
key once. Two-beep confirms the entry.
NOTE:
(a) The Secondary User Code is a user code putting after a card in programming. It can be a
proprietary user code for each user card or a code repeatedly used for a group of user cards as
group user code (e.g. for a group of staff working in the same department).
(b) The Common User Codes for the Output 1 & 2 have been programmed first at Locations 03 & 04
respectively. It is not necessary to key in the code again in programming here and it will
follow the card automatically after the card is read.
(c) Deletion of an User Code or Card (if the card was lost) can be done by keying-in its ID number.
For deleting an existing cards, simply read the card once and confirm. It does not require the ID
number. The Card includes the combinations of (1) Card Only, (2) Card + Secondary User Code
and (3) Card + Common User Code.
(1)
(2)
(5)
(4)
(3)
Location. Clearing takes few seconds to a minute.
