- 9 -
TSE-N 10.00 A. B.
599 50 84 90
EN
1
1
Removing the softener unit :
1
remove the securing nut located under the salt cap.
2
press softener (1) down and remove it through the front
from the base area
3
CAUTION if accessible release reed switch.
Removing the base :
1
remove side panels, rear panel and plinth panel
2
gently release base fixing clips with a screwdriver (figure)
3
take off base carefully and release circulation pump,
electronic and heater relay
4
disconnect the float switch
With base removed the circulation pump (1) is accessible.
