Execute a washing cycle
23
During the washing program
you can at any time
– alter the setting of the final spin speed,
– press the button
o
(RINSE HOLD),
– alter the temperature setting;
Other settings cannot be altered.
To stop the washing program before it is finished :
0
Push in program selector.
0
Turn the program selector clockwise to
v
(PUMP OUT).
0
Pull out program selector.
If washing cycle is completed/remove the washing
The washing program normally ends with the final spin.
After Rinse Hold:
After a Rinse Hold the water must be pumped out first or the washing
spun:
0
Release the
o
(RINSE HOLD) button.
0
Turn the program selector clockwise to
– Position
6
(SPIN)
or
– Position
8
for delicates or position
11
for woollens
(SHORT SPIN).
Washing is spun in accordance with the program group selected and
the final spin speed set,
or:
–
v
(PUMP OUT).
The water is pumped out.
0
Open the fill-in door.
0
Remove the washing.
0
Press in the program selector
.
The washing machine is now off.
0
Close the water tap.
0
Pull out the detergent compartment a little bit, so that it can dry out.
Leave door slightly open so that the washing machine can ventilate.