Execute a washing cycle
19
Execute a washing cycle
Brief instructions
A washing cycle proceeds in the following steps:
0
Open the door, fill in the washing.
0
Shut the door.
0
Add detergent/conditioner.
0
Set the correct washing program:
– Set the program via the program selector;
– Set the temperature via the temperature selector;
0
Pull out program selector.
Washing program starts automatically after six seconds.
0
If necessary change the final spin speed or press the
o
(RINSE HOLD)
button.
You can alter this setting and the temperature during the entire wash-
ing cycle.
After the washing program runs out:
Important!
If the washing cycle ends with a rinse hold, either PUMP
OUT the water (position
v
) or perform a SPIN (position
6
) or SHORT
SPIN (position
8
for delicates or position
11
for wool) prior to opening
the door.
0
Open the door, remove the washing.
0
Press in the program selector.
This switches the washing machine off.