AEG 47009GO-MN, Руководство пользователя

Страница: 22 / 28

22
The cooker is equipped with 2 chains
fixed on each side at the rear of the
cooker near the top (see FIG. 12 ).
The chains are fitted with “spring clips”
which must be clipped to the “screw
eyes” provided with the cooker. Install
the “screw eyes” as follows :
1. Drill four 6mm holes (position 1 - 2
- 3 - 4) in the wall as in FIG. 12 .
2. Insert part “R” into the holes then
screw in the “screw eyes” part “G”
see FIG. 13 .
To fix the cooker to the rear wall
Warning !
For safety reasons and to
prevent tipping of the
appliance, these stabilizing
means must be installed
If the part provided is not
suitable for the wall material
please use an appropriate
device to ensure secure hol-
ding of the “screw eyes” to the
wall.
If the cooker is moved for
any reason (e.g. maintenan-
ce) resulting in the cooker
being unclipped from the
wall, the cooker must be re-
clipped to the wall at the
completion of the task.
3. Bring the cooker near the wall and
clip the chains on the “screw eyes” as
in FIG. 14 .
FIG. 12
FIG. 13 FIG. 14
76 mm
550 mm
55 mm
chain
Position
1
Position
2
55 mm
G
wall
wall
G R Hole
Position
3
Position
4