AEG 47009GO-MN, Руководство пользователя

Страница: 10 / 28

10
1
Burner cap
2
3
4
Burner crown
Ignition candle
Thermocouple
HOB - DAILY USE
Warning! Be very careful when
you use open fire in kitchen
environment. Manufacturer decli-
ne any responsibility in case
misuse of the flame
Always light the burner before
you put cookware.
Ignition of the burner
1. Turn the control knob counterclockwise
to the maximum position ( ) and push
it down.
2. Keep the control knob pushed for
approximately 10 seconds; this will let
thermocouple to warm up. If not, the gas
supply will be interrupted.
3. Adjust the flame after it is regular.
If after some tries the burner does not
light, check if the crown and its cap are
in correct positions.
To light the burner:
If after some tries the burner does
not light, check if the crown and
its cap are in correct positions.
3
4
2
1
1
2
3
4
Turning the burner off
To put the flame out, turn the knob to the
symbol 0 ( Off ).
Warning! Do not keep control
knob pressed for more than 15
seconds. If the burner does not
light after 15 seconds, release the
control knob, turn it into off position
and wait for at least 1 minute
before trying to light the burner
again.
Warning! Always turn the flame
down or switch it off before you
remove the pans of the burner.
Warning! Always use the control
knob to switch off a burner.