AEG ID ARE DT1 LF, Руководство по установке

Страница: 10 / 28

--------------------------------------------------------------------------------10/28--------------------------------------------------------------------------------
3.2.3 LED – LED control
With the command LED you can control the LED ring of the ARE DT1.
Input format: LED <SP> parameter <CR>
Output (example):
1
<CR>
Parameter:
PARAMETER FUNCTION
0 off
1 on
2 Buzzer beeps,
LEDs flash
final state =initial
state
3.2.4 RST – reset
With the command RST the reader does a warmstart and loads the saved settings from the internal
EEPROM. The antenna field is off after the reset.
Input format:
RST
<CR>
Output (example): ACK <CR>
3.2.5 VER – version
With the command VER the reader sends the actual firmware version.
Input format:
VER
<CR>
Output (example):
AEG ID V1.22
<CR>