AEG ID ARE DT1 LF, Руководство по установке

Страница: 11 / 28

--------------------------------------------------------------------------------11/28--------------------------------------------------------------------------------
3.2.6
HF – Antenna field
With the command HF, the antenna field can be set or reset manually.
Input format: HF <SP> parameter <CR>
Parameter:
PARAMETER FUNCTION
0 Switch off antenna field (this stops automatic mode)
1 Switch on antenna field (this stops automatic mode)
2 Automaticmode, the antenne field is activated by reader to
comunicate with the transponder, afterwards it is switched off
automatically. Therefore it is not compatible with the pass-
word mode.
The reader answers with the adopted antenna mode.
Input (examplel): HF <SP> 2 <CR>
Output: 2 <CR>
Note: The command is supported in A17 and A24 software version.
3.2.7 HID – human interface device/keyboard
The command switches the interface ether to HID or RS232 emulation.
Input format:
HID
<SP>
parameter
<CR>
Output (example):
0
<CR>
Parameter:
PARAMETER FUNCTION
0 RS232 emulation, COM port
1 HID interface, keyboard