AEG ID ARE DT1 LF, Руководство по установке

Страница: 27 / 28

--------------------------------------------------------------------------------27/28--------------------------------------------------------------------------------
Environmental electromagnetic noise may also reduce the read and write range considerably.
Arrangement to eliminate such troubles must be done specific to the application by the help of engineers
of the manufacturer.
6 FCC Information
Name of yrantee AEy Identifiaktionssysteme ymbH
Equipment Class Part 15 Low Power Transmitter Below 1705 kHz
Notes RFID Reader
FCC Rule Parts 15C
FCC IDENTIFIER
Frequency Range Model ID No.
V7IAREDT1LF-1 0.1342 – 0.1342 MHz ARE DT1 – 17L / A / U / H 1004371
V7IUDT100L 0.1342 – 0.1342 MHz UDT-100L – 17L / UD / U / H / CS1 1005082
Federal Communications Commissions (FCC) Statement
15.21
You are cautioned that changes or modifications not expressly approved by the part responsible for com-
pliance could void the user’s authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connect-
ed.
- Consult the dealer or an experienced radio/TV technician for help.