manualshive.com logo in svg

AE Techron 3110, Справочные файлы и описание продукта

Поделиться
Скачать
AE Techron 3110 Скачать руководство пользователя страница 17

12-17-2018

Information subject to change

17

3110 HELP FILES – SECTION 4

should be plugged into one port on the USB Hub. 
The second port on the USB Hub can be used for 
the supplied USB drive.

 IMPORTANT: 

The 2-port 

USB Hub can only be used in the USB port labeled 
“Mouse.”

The USB drive contains the Windows’ Remote 

Client software Setup.exe file that can used to 

install the remote access program on a Windows’ 
computer. For more information, see the topic 

“Re-

mote Operation.”

The USB directory will be visible at the top level 
of the Files window when working directly on the 
3110 or when accessing the 3110 remotely. How-
ever, the USB directory will not appear when work-
ing in Demo Mode. The USB directory can only be 
opened when the USB drive has been inserted into 
the the open USB port on the USB Hub attached 
to the 3110/DSR system.

To safely remove a USB drive from the USB port, 

first select the Unmount USB button in the Files 

window, and then remove the drive from the USB 
hub. Note: If the Unmount USB button is not 
pressed before removing the USB drive, the 3110/
DSR system may not recognize the USB drive 
when it is returned to the USB port. If the USB 
drive is not recognized, press the Unmount USB 
button and then remove the USB drive from the 
USB port. Then return the USB drive to the USB 
port to gain access to the USB drive.

The USB drive also can be used to create a back-

up of the .swg files stored in the 3110/DSR system 
and to move .swg files created on a Windows 

computer running in Demo Mode to the 3110/DSR 
system for use. See the topic 

“Working in Demo 

Mode” 

earlier in this section.

In addition, the USB drive can be used to update 
the 3110/DSR system See the following topic 

“Up-

dating the 3110”

 

for more information.

4.5  Updating the 3110/DSR System

Updates for the 3110 software (including addi-

tions to the Standards Library) and the Windows’ 

Remote Client software are available on the AE 

Techron website (aetechron.com). 

NOTE: 

When 

updating the 3110 software, all Windows comput-
ers used to access the 3110 remotely must also 
be updated with the corresponding version of the 
Windows’ Remote Client software.

Complete the following steps to update the soft-
ware and load additional tests into the Standard’s 
Library on the 3110/DSR system:
1.  From a computer with access to your network, 

go to the AE Techron website (aetechron.com) 

and check for 3110 updates. Locate the up-

date package (Apk file) for updating the 3110 

software (not the Windows remote client .exe 

file). Follow the instructions provided there for 
downloading the update file. Save the file on 

the USB drive that came with your 3110/DSR 
system.

2.  Insert the USB drive into the open port on the 

USB hub that has been inserted into the USB 
port on 3110/DSR system back panel labeled 
“Mouse.”

3.  Turn on the 3110/DSR system and allow the 

software interface to load. Then locate and 
press the Files button to open the Files explor-
er. Open the USB directory and then locate the 

update Apk file you saved.

4. 

Select and open the .apk file. You will be 
prompted to approve new permissions (if any). 

If no new permissions are required, select 
the INSTALL button at the bottom right of the 
screen to start the update process (see 

Figure 

4.6

).

5.  The message “App installed” will appear in the 

window when the update has been success-
fully performed. Select the “Done” button to 
close the dialog box and return to the normal 
3110 interface.

6.  Check the version information displayed on 

the About Server tab in the Settings window 

to confirm the update has been successfully 

installed.

Содержание 3110



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды