Advantech TREK-510, Руководство пользователя

Страница: 5 / 89

TREK ‐ 510 User manual 5
Safety Instructions
1. Read these safety instructions carefully.
2. Keep this user manual for later reference.
3. Disconnect this equipment from AC outlet before cleaning. Do not use liquid or spray detergents
for cleaning.
4. For pluggable equipment, the power outlet shall be installed near the equipment and shall be
easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall could
cause damage.
7. Do not leave this equipment in an environment unconditioned where the storage temperature
under ‐ 30
°
C ( ‐ 22
°
F) or above 70
°
C (158
°
F), it may damage the equipment.
Operating temperature: 50
°
C. Safety Certificate Temperature: 50
°
C
8. The openings on the enclosure are for air convection hence protects the equipment from
overheating. DO NOT COVER THE OPENINGS.
9. Make sure the voltage of the power source is correct before connecting the equipment to the
power outlet.
10. Place the power cord such a way that people can not step on it. Do not place anything over the
power cord. The voltage and current rating of the cord should be greater than the voltage and
current rating marked on the product.
11. All cautions and warnings on the equipment should be noted.
12. If the equipment is not used for long time, disconnect it from the power source to avoid being
damaged by transient over ‐ voltage.
13. Never pour any liquid into ventilation openings. This could cause fire or electrical shock.
14. Never open the equipment. For safety reasons, the equipment should be opened only by
qualified service personnel.
15. If any of the following situations arises, get the equipment checked by service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well or you cannot get it to work according to user manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
16. CAUTION: The computer is provided with a battery ‐ powered real ‐ time clock circuit. There is a
danger of explosion if battery is incorrectly replaced. Replace only with same or equivalent type
recommended by the manufacture. Discard used batteries according to the manufacturer’s
instructions.
17. THE COMPUTER IS PROVIDED WITH CD DRIVES COMPLY WITH APPROPRIATE SAFETY STANDARDS
INCLUDING IEC 60825.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT