Advantech TREK-510, Руководство пользователя

Страница: 16 / 89

TREK ‐ 510 User manual 13
– Support power on delay
– Support power low delay
– Support power low hard delay
– Support hard off delay
Note! For more detail of function please refer to Chapter 7, Section 6.3 of this manual.
z
Enclosure : Ruggedized aluminum without ventilation holes.
z
CPU : STA2062 333 MHz
z
System memory : 2 GB on board flash for bootloader, image & Customer's AP
z
Storage : SD : 1 x (external accessible)
z
Serial ports :
„
COM 1&2: 2 x Full Function RS ‐ 232, 5 V/12 V @ 0.5 A, ping9, by jumper selected
„
COM3: 1 x 4 ‐ wire RS ‐ 232/485 (control by SW, 5 V/12 V @ 0.5 A, ping9, by jumper
selected
z
USB Host port : Supports up to two USB1.1 x by Type A. One from smart display port.
z
USB Client port: 1 x by mini Type AB
z
Watchdog timer : Supports 0 ‐ 255 secs time intervals, SW programmable and SW
enable/disabled.
z
RTC Battery : 3.0 V @ 200 mAH lithium battery.
z
Power management : Supports power saving modes including Normal mode.
z
Digital I/O : 4 x Isolated dry contact digital inputs from DB9 connector (2500 Vrms
protection), 4 x relay driver from DB9 connector
z
CA N bus : Support CAN V2.0B up to 500 kb/s.
z
Audio: 2 audio codecs, one is for smart display, one is for TREK ‐ 510 line out and mic in
phone jack.
z
Optional modules :
‹
GPS
z
LEA ‐ 5S: 50 channels GPS
‹
RF :
z
Quad ‐ band GSM/GPRS, HSDPA, CDMA
z
Operating temperature : ‐ 30 ~ 70° C
z
Relative humidity : 10 ~ 95% @ 40° C (non ‐ condensing)
z
Shock : 30 G peak acceleration (11 msec duration)
z
Certifications : CE, FCC, CCC, Emark
z
Vibration : 5 ~ 500 Hz SAE J1455 4.9.4.2, MIL ‐ STD ‐ 810F 514.5