Advantech PPC-102, Руководство пользователя

Страница: 71 / 126

Chapter 4 Software Configuration 57
4.5 Ethernet Software Configuration
The PPC-102’s on-board Ethernet interface supports all major network
operating systems. To configure the medium type, to view the current
configuration, or to run diagnostics, do the following:
1. Power the PPC-102 on. Ensure that the RSET8139.EXE file is located
in the working drive.
2. At the prompt type RSET8139.EXE and press <Enter>. The Ethernet
configuration program will then be displayed.
3. This simple screen shows all the available options for the Ethernet
interface. Just highlight the option you wish to change by using the
Up and Down keys. To change a selected item, press <Enter>, and a
screen will appear with the available options. Highlight your option
and press <Enter>. Each highlighted option has a helpful message
guide displayed at the bottom of the screen for additional information.
4. After you have made your selections and are sure this is the configu-
ration you want, press ESC. A prompt will appear asking if you want
to save the configuration. Press Y if you want to save.
The Ethernet Setup Menu also offers three very useful diagnostic func-
tions. These are:
1. Run EEPROM test.
2. Run Diagnostics on Board.
3. Run Diagnostics on Network.
Each option has its own display screen that shows the format and result of
any diagnostic tests undertaken.
Note: The PPC-102 is supplied with a software utility disk in the
accessory box. The file RSET8139.EXE is located on the utility disk.