Advantech eWorx SE500, Руководство пользователя

Страница: 52 / 209

eWorx SE500 Series Switches
:
52
3. CONFIGURATION UTILITY
3. FIRST TIME SETUP
3.1.1 OVERVIEW
The Industrial Ethernet Managed Switch is a configurable device that facilitates the
interconnection of Ethernet devices on an Ethernet network. This includes computers, operator
interfaces, I/O, controllers, RTUs, PLCs, other switches/hubs or any device that supports the
standard IEEE 802.3 Ethernet protocol.
This switch has all the capabilities of a store and forward Ethernet switch plus advanced
management features such as SNMP, RSTP and port mirroring. This manual details how to
configure the various management parameters in this easy to use switch.
3.1.2 INTRODUCTION
To take full advantage of all the features and resources available from the switch, it must be
configured for your network.
The switch implements Rapid Spanning Tree Protocol (RSTP) and Simple Network Management
Protocol (SNMP) to provide most of the services offered by the switch. Rapid Spanning Tree
Protocol allows managed switches to communicate with each other to ensure that there exists
only one active route between each pair of network nodes and provides automatic failover to
the next available redundant route. A brief explanation of how RSTP works is given in the
Spanning Tree section.
The switch is capable of communicating with other SNMP capable devices on the network to
exchange management information. This statistical/derived information from the network is
saved in the Management Information Base (MIB) of the switch. The MIB is divided into several
different information storage groups. These groups will be elaborated in detail in the
Management and SNMP information section of this document. The switch implements Internet
Group Management Protocol (IGMP) to optimize the flow of multicast traffic on your network.
The switch supports both port-based and tag-based Virtual LANs for flexible integration with
VLAN-aware networks with support for VLAN-unaware devices.