Advantech ADAM-6000 series Скачать руководство пользователя страница 97

Страница: 97 / 156

ADAMTCP_Read6KAI

Description:

To read analog input channel's value for an ADAM-6000 module.

Syntax:

int ADAMTCP_Read6KAI(char szIP[], WORD wModule, WORD wIDAddr, WORD wGain[], WORD

wHex[], double dlValue[])

Parameter:

szIP[in]: the IP Address of the target ADAM-6000 module to be connected.

wModule[in]: the module name of the ADAM-6000 module to be connected.

(For example, 6050, 6051, or 6060)

wIDAddr[in]: the Modbus device ID for an ADAM-6000 module. (Always 1)

wGain[in]: the range code against analog input range for individual channels stored in

this array.

wHex[out]: an unsigned 16-bit array that stored the value reading from AI channels.

dlValue[out]: an array that stored the values in engineer unit format that reading from AI

channels.

Return:

Please refer to Chapter 6-2-3 "Return Codes" for more detail information.

Содержание ADAM-6000 series





























































































































































Результаты поиска

Содержание ADAM-6000 series

Отзывы:

Бренды по названию

Популярные бренды

Advantech ADAM-6000 series, Руководство пользователя

Результаты поиска

Содержание ADAM-6000 series

Отзывы:

Бренды по названию

Популярные бренды