Advanced Navigation Motus Скачать руководство пользователя

Страница: 147 / 147

Motus Reference Manual

Page 146 of 146

Version 1.1

29/11/2019

Information in this document is provided solely in connection with Advanced Navigation products. Advanced Navigation

reserves the right to make changes, corrections, modifications or improvements, to this document, and the products

and services described herein at any time, without notice.

All Advanced Navigation products are sold pursuant to Advanced Navigation’s terms and conditions of sale.

Purchasers are solely responsible for the choice, selection and use of the Advanced Navigation products and services

described herein, and Advanced Navigation assumes no liability whatsoever relating to the choice, selection or use of

the Advanced Navigation products and services described herein.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this

document. If any part of this document refers to any third party products or services it shall not be deemed a license

grant by Advanced Navigation for the use of such third party products or services, or any intellectual property

contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products

or services or any intellectual property contained therein.

UNLESS OTHERWISE SET FORTH IN ADVANCED NAVIGATION’S TERMS AND CONDITIONS OF SALE ADVANCED

NAVIGATION DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ADVANCED

NAVIGATION PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY

PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.

UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ADVANCED NAVIGATION REPRESENTATIVES,

ADVANCED NAVIGATION PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR

CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR

MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE.

ADVANCED NAVIGATION PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN

AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.

Resale of Advanced Navigation products with provisions different from the statements and/or technical features set

forth in this document shall immediately void any warranty granted by Advanced Navigation for the Advanced

Navigation product or service described herein and shall not create or extend in any manner whatsoever, any

liability of Advanced Navigation.

Information in this document supersedes and replaces all information previously supplied.

Содержание Motus




















































































































































Результаты поиска

Содержание Motus

Отзывы:

Похожие инструкции для Motus

Бренды по названию

Популярные бренды

Advanced Navigation Motus, Справочное руководство

Результаты поиска

Содержание Motus

Отзывы:

Похожие инструкции для Motus

Бренды по названию

Популярные бренды