manualshive.com logo in svg

Advanced Instruments 3320, Руководство пользователя

Поделиться
Скачать
Advanced Instruments 3320 Скачать руководство пользователя страница 73

53

Warranty & Warranty Duties

d. Only during the time when the user

has not loaned, leased or resold the
equipment to any third party.

2.     

"

Reasonable use

"

is use:

a.

According to the instructions sup-
plied by Advanced Instruments
(assuming English-reading person-
nel or supervision).  If neither the
supervisor nor the operator reads
English, the user agrees to obtain
accurate translations of the instru-
ment labels, instructions, user's
guides and/or manuals provided.

b. Under direct, on-the-job supervi-

sion of the supervisor or other pro-
fessional in charge.

c.

In which there are no known
defects or uncorrected repairs.

d. Only for the purpose stated in the

instructions provided with the
instrument.

e.

In which the equipment has been
maintained according to the
instructions provided.

3. 

"

Immediate notification

"

is:

a.

Recognition that time is of the
essence when any accident, mal-
practice or product liability arises
which involves Advanced
Instruments equipment.

b. Notification to Advanced

Instruments immediately (the same
day, if possible) in the event of
injury to any person in circum-
stances involving Advanced
Instruments equipment in which
Advanced Instruments might be

named as a defendant in any form
of litigation.

c.

Allowing Advanced Instruments
or its representatives, immediate,
full, and thorough examination of
Advanced Instruments equipment,
and all records pertaining to such
equipment.

Содержание 3320





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды