manualshive.com logo in svg

Advanced Instruments 3320, Руководство пользователя

Поделиться
Скачать
Advanced Instruments 3320 Скачать руководство пользователя страница 67

47

•

      This product has been designed and manufactured in accordance

with U.S., Canadian, and European regulatory requirements as out-
lined below.  Modifications made to this product that are not
expressly approved in writing by the manufacturer will void the
user’s authority to operate this product, previously issued factory
approvals, and the user’s rights under the warranty.

•

      The distributor or dealer may have applied additional local, nation-

al, or international approvals to this product.  Consult the distribu-
tor or dealer for more information and documentation. 

•

      Connections to this product must be made with shielded cables.

Use of non-shielded cables may violate RFI/EMI limits.

Symbol Conventions

This symbol indicates conformity to relevant European
directives.

This symbol indicates the product was tested to conform to
relevant Canadian and U.S. safety standards by Intertek
Testing Services NA, Inc. The ETL mark is approved in the
United States as a Nationally Recognized Testing Lab
(NRTL) by OSHA, and in Canada by the Standards Council
of Canada.

In Vitro

Diagnostic Medical Device complying with EU

Directive 98/79/EC.

Regulatory Notices

Appendix C

Содержание 3320





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды