manualshive.com logo in svg

Advanced Instruments 3320, Руководство пользователя

Поделиться
Скачать
Advanced Instruments 3320 Скачать руководство пользователя страница 32

Advanced

®

Micro-Osmometer Model 3320 User’s Guide

Protinol

®

(Part No. 3MA028)

Advanced Protinol

®

protein-based controls, at 240, 280 and 320 mOsm

(±7 mOsm), provide control values that closely bracket those of most
serum samples. These controls are formulated to mimic the freezing
characteristics of actual serum samples, and they can be used to verify
the precision and reliability of your osmometer results.

Renol

™

(Part No. 3LA085)

Advanced Renol™ urea-based controls, at 300 and 800 mOsm (±10
mOsm), provide control values that closely bracket those of most urine
samples.  These controls are formulated to mimic the freezing character-
istics of actual urine samples, and they can be used to verify the preci-
sion and reliability of your osmometer results.  

Advanced

®

Five-Level Linearity Set (Part No. 3LA028)

The Advanced

®

Linearity Set contains five controls (100, 500, 900,

1500, and 2000 mOsm). Use this set to verify or establish the reportable
range of patient test results. 

Sample test procedure

Use the following procedure to run sample tests. 

1.    Insert a sampler tip into place on the sampler. The sampler tip must

be straight and firmly seated. 

2.    Depress the sampler’s plunger and insert the sampler tip at least 

¼ inch (6 mm) below the surface of the fluid to be tested. Gently
release the plunger to load a 20-µL sample.

3.    Visually inspect the sample. If there are any large voids or bubbles

in the sample, expel the sample and load a bubble-free sample.

4.    Wipe the sides of the loaded sampler tip with a soft, no-lint, non-

ionic paper tissue to remove any clinging droplets. Then quickly
wipe the end of the sampler tip to remove any fluid protruding

12

Содержание 3320





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды