manualshive.com logo in svg

Advanced Instruments 3320, Руководство пользователя

Поделиться
Скачать
Advanced Instruments 3320 Скачать руководство пользователя страница 12

This symbol indicates the presence of alternating current (AC).

This symbol indicates the presence of a fuse.

This symbol indicates the presence of protective earth ground.

This symbol indicates the power is ON.

This symbol indicates the power is OFF.

General cautions

•      This product should be operated only with the type of power source

indicated on the product’s electrical ratings label.  Refer to the
installation instructions included with the product.

•      If the power cord provided is replaced for any reason or if an alter-

nate cord is used, the cord must be approved for use in the local
country.  The power cord must be approved for the product’s listed
operating voltage and be rated at least 20% greater than the ampere
ratings marked on the product’s electrical ratings label.  The cord
end that connects to the product must have an IEC 60320 connec-
tor.

•      Plug the product into an approved grounded electrical outlet.

•      Do not disable the power cord’s grounding plug.

•      If an extension cord or power strip is used, make sure that the cord

or strip is rated for the product, and that the total ampere ratings of
all products plugged into the extension cord or strip do not exceed
80% of the cord’s or strip’s rating limit.

xii

Advanced

®

Micro-Osmometer Model 3320 User’s Guide

Содержание 3320





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды