manualshive.com logo in svg

Advanced Instruments 3320, Руководство пользователя

Поделиться
Скачать
Advanced Instruments 3320 Скачать руководство пользователя страница 72

Advanced

®

Micro-Osmometer Model 3320 User’s Guide

52

2.      Knows of no defects in design or

materials which may cause bodily
injury.

3.     Will endeavor to advise the user of

changes or improvements in the
instrument as they are developed, so
that the user may take steps to
improve the safety and performance
of his equipment throughout its use-
ful life.

4.      Will replace or repair equipment

according to the guarantee on the
attached warranty.

5.      Will cooperate closely in common

defense of any accident involving
this equipment, or third-party suit
against the user or operating person-
nel, if advised immediately by the
user of the occurrence of any acci-
dent.

THE USER WARRANTS THAT:

1.     The instrument will be used reason-

ably.

2.      The instrument will be regularly

maintained according to this manual,
including a log of all service, tests
and repairs performed on the equip-
ment, and records will be kept of all
requests for repair made to Advanced
Instruments where such repairs were
beyond the ability of local service
personnel.

3.     The instrument will not be altered

without written approval from
Advanced Instruments.

4.      Advanced Instruments will be notified

immediately if any injury occurs in
any association with the instrument

and will be allowed prompt and thor-
ough examination of the instrument in
question.

5.      Advanced Instruments will be held

harmless in cases of injury arising
(see definitions below):

a. Beyond the useful life of the

equipment.

b. From unreasonable use.

c. When Advanced Instruments is not

immediately notified of said
injury.

d. From interpretation of results.

DEFINITIONS

1. 

"

Useful life

"

is:

a.

The same as the depreciation life in
the Internal Revenue Service guide-
lines, whether or not the user actual-
ly depreciates the instrument, but not
to exceed 10 years from date of
delivery to the user.

b. Only during the time the equipment

has been maintained on a regular
basis as prescribed by Advanced
Instruments.  If the user is in an
area which has no local service,
Advanced Instruments may require
a local service person (understood
to mean the person actually per-
forming the "hands-on" service of
the equipment) to attend and pass a
reasonable maintenance and repair
course.

c.

Only during the time when the user
has not altered the equipment in
any way without written approval
from Advanced Instruments.

Содержание 3320





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды