Adtech ADT-HC8200, Руководство пользователя

Страница: 62 / 97

Chapter 3 Function and Operation
3-38
3) Use the measuring tool to measure the actual moving distance at the direction of the selected axis, and
enter this value into the Actual distance as shown in Figure 3.2.4.3.5, then press Enter, the actual pulse offset will
display in Actual pulse offset, as shown in Figure 3.2.4.3.6.
Figure 3.2.4.3.6 Accuracy setting completed
4) Press Enter, system will save the pulse offset and the accuracy guide is completed. Users may repeat the
above steps to set pulse offset for different axis or the same axis.
Note: normally, slight difference may occur in the pulse offsets of the X axis and Y axis in the same
equipment, so you need to set them respectively in the adjustment (it is recommended to adjust them to be the
same with each other).
System
Other settings for the control of the system are shown in the figure below: