ADT SERIES 4250, Руководство пользователя

Страница: 9 / 38

8
S
ETTING THE
S
YSTEM
(
TURNING THE SYSTEM ON
)
FULL SET (Full Arming)
The FULL SET selection procedure is as follows:
1) Close all doors and windows to secure the premises.
2) Prior to setting the system the keypad LED will be a
steady green indicator and the Keypad Keypad LCD
Display will show.
Part-Set Full-Set
3) Press FULL SET key
4) The Keypad LCD Display will change and you will be
prompted to enter your “x” digit user code and press
the enter button.
5) Key in the ‘x’ digit user code and press “enter”.
6) After a short delay the code will be verified, the keypad
and Exit/Entry buzzer (if fitted) will start to bleep. The
keypad will begin to countdown a predetermined time
in seconds to allow exit from the premises.
7) Leave the premises immediately via the designated Exit/
Entry route, close and lock the final door and operate
the Final Exit Terminator switch. If the Exit Terminator
switch is not operated the system will automatically set
after the predetermined exit time.
8. The keypad then beeps twice and the buzzer stops to
confirm that the system is set.