ADT SERIES 4250, Руководство пользователя

Страница: 14 / 38

13
PART SET (Partially armed)
The PART SET condition allows the alarm system to be
armed (set) in certain zones of the protected premises
while the remainder of the premises are occupied. Two
PART SET selections are available as follows:
Delay selection: This feature is selected when access to
the non-alarmed (occupied) area is via a protected part
of the premises. When the PART SET delay selection is
set at the keypad there is a time delay to allow the user
to leave the protected area. On entering the protected
area by the normal entry route there is a similar time
delay to allow the user to key in the ‘x’ digit user code to
UNSET (switch off) the system. During both time delays
the keypad will bleep. An example of using this selection
is a house with the downstairs protected and the upstairs
occupied but the occupants require access to the
keypad to PART SET or UNSET the system.
Instant selection: This feature is selected when access
to the occupied area is not via a protected part of the
premises. In this instance the keypad is located outside
the protected area eg. a keypad is upstairs enabling the
downstairs to be PART SET/UNSET with no time delay. Any
intrusion downstairs will result in an alarm signal being
reported to the Alarm Receiving Centre.
S
ETTING THE
S
YSTEM
(
TURNING THE SYSTEM ON
)