ADT SERIES 4250, Руководство пользователя

Страница: 35 / 38

34
A
DVANCE
S
YSTEM
F
EATURES
MULTIPLE PARTITION ARMING/DISARMING
NOTE: For multiple partition arming, all the partitions
must be programmed in the same security mode.
The programming of the security mode is a
function of the Alarm Receiving Centre and Alarm
Company.
Arming
To carry out multiple partition arming carry out the
following using the keypad located in Partition A.
1) Ensure the system is UNSET. If not, carry out the
unsetting procedure.
2) Press ‘Full Set’ key, the display will change and
prompt for the master code to be entered.
3) Key in the ‘x’ digit master code and press ‘enter’.
4) Press the Yes key to arm all the partitions. The display
will change to setting procedure display.
5) Carry out the Full Set procedure and on completion
at the keypad leave by the designated Exit/Entry
route within the time limit.
Disarming
To carry out the following using a keypad located in any
partition.
1) Key in the ‘x’ digit master code and press ‘enter’.
The keypad display will change to prompt a Yes/No
answer.
2) Press ‘Yes’ key to disarm the zones, and follow
instructions shown on the keypad display.