ADT SERIES 4250, Руководство пользователя

Страница: 34 / 38

33
NOTE: To use any of the advanced system features the
User will require the system master code.
ADDING ADDITIONAL ACCESS CODE
The user can use the keypad to program a user assigned
code into the system for specific individuals, such as
cleaners or temporary employees. Only one user-assigned
code can be in the system at any one time.
To program a user-assigned code carry out the following:
1) Ensure the system is in the UNSET condition. If not,
then carry out the unsetting procedure.
2) Key in the system master code and press ‘enter’.
3) Press the ‘System’ key.
4) Press the ‘Change Code’ key.
5) Key in the new user-assigned code and press ‘enter’.
6) Verification of the new user code is now prompted. Key
in the new user code again and press ‘enter’.
NOTE: If a keypad action does not occur within 15
seconds then the display will return to the previous
condition.
REMOVING ADDITIONAL ACCESS CODE
To remove a user assigned code from the system carry out
the following:
1) Ensure the system is in UNSET. If not, then carry out the
Unsetting procedure.
2) Key in the system master code and press ‘enter’.
3) Press the ‘System’ key.
4) Press the ‘Change Code’ key.
5) The display will prompt for a code, key in user code to
be removed and press ‘enter’.
6) Press ‘OK’ key.
7) The user code has now been removed.
A
DVANCE
S
YSTEM
F
EATURES