ADT SERIES 4250, Руководство пользователя

Страница: 12 / 38

11
PROBLEMS WHEN SELECTING FULL SET
Deviation from the Correct Exit Procedure
Deviating from the designated Exit route when the
countdown period has started will cause the keypad exit
bleep to change to a continuous tone. Returning to the
correct route, i.e. closing any doors on the wrong route
will cause the keypad bleeper tone to change to the
normal intermittent bleep and you will be able to exit
normally. If any zones having been entered by deviating
from the exit route are not restored, e.g. doors not
closed, within the set exit time the keypad display will
show:
The “FAILED TO EXIT” condition will be reported to the
Alarm Receiving Centre and the audible tone will continue
to sound until the ‘x’ digit user code is entered.
Pressing the * key will display the fault status condition.
Eliminate the fault and repeat the FULL SET procedure.
S
ETTING THE
S
YSTEM
(
TURNING THE SYSTEM ON
)