background image

– 12 –

Type 10

Interior w/Delay

This zone type gives  entry delay (using the programmed entry time), if tripped
when the panel is armed in the Away mode, regardless of whether or not an
entry/exit delay zone was tripped first.  Exit delay is present for any  arming
mode.  This zone type is bypassed automatically when the panel is
armed Stay or Instant .

Type 20

Arm–Stay

This is a special-purpose zone type used with 5800 series wireless
pushbutton units which will result in arming the system in the STAY mode
when the zone is activated. Pushbutton units send zone number as a user
number to central station when arming or disarming.

Type 21

Arm–Away

This is a special-purpose zone type used with 5800 series wireless
pushbutton units which will result in arming the system in the AWAY
mode when the zone is activated. Pushbutton units send zone number as a
user number to central station when arming or disarming.

Type 22

Disarm

This is a special-purpose zone type used with 5800 series wireless
pushbutton which will result in disarming the system when the zone is
activated.

Type 23*

No Alarm Response

Used with 5800 wireless system only. This zone type can be used on a zone
when an output relay action is desired, but with no accompanying alarm
(e.g., lobby door access).

Type 25*

This is a special-purpose zone type used with sensors designed to provide a
trouble display (but no trouble sounding) when an oil tank is low, or other
similar application for critical condition monitoring where a non-alarm
response is required.  When this zone type is assigned to a zone, and that
zone is faulted and remains faulted for the programmed time duration, a
special event message is sent to the central monitoring station. The same
holds true for restoration.

* Note: The system can still be armed when these zone types are in a faulted condition.

By using a 5881 type RF Receiver and the appropriate 5800 series transmitters, all of the
zone types listed are available for the wireless portion of the system, if used.

Содержание SA10ADTEG

























Отзывы: