ADT GSMVLP-ADT, Инструкция по установке и программированию

Страница: 6 / 24

– 6 –
BACK
CASE
GSMVLP-001-V0
AUDIO
CABLE
MOUNTING
HOOK
7720P
PROGRAMMING
JACK
TIE-WRAP
POINT
WIRE
ROUTING
TUNNELS
MOUNTING
HOOK
TIE WRAP
FRONT
CASE
ECP/POWER
CABLE
BATTERY
CABLE
TIE WRAP
MOUNT
Figure 4 – GSMVLP-ADT Wiring Connections and Routing
Programming the GSMVLP-ADT Module
The GSMVLP-ADT Module can be programmed through the following methods:
•
The AlarmNet Direct website
•
Use of a 7720P Programming Tool
Using the AlarmNet Direct website
To program the module via the website (if you are already signed up for this service), go to:
https://services.alarmnet.com/AlarmNetDirect/userlogin.aspx
If you are not signed up for this service, click on “Dealer Sign-Up”. Log in and follow the on-screen
prompts. Please have the following information available when programming the module:
1. CS1 IP Address (12-digit number)
2. CS1 Port (0-65535)
3. Access Point Name (APN 1) (roch, aurora, kc)
4. CS2 IP Address (12-digit number)
5. CS2 Port (0-65535)
6. Access Point Name (APN 2) (roch, aurora, kc)
7. Primary Subsystem Number (two-digit number)
8. Primary Group Number (three-digit number)
9. Primary Subscriber ID (four-digit number)
10. After programming is complete, you must transfer the data to the GSMVLP-ADT.