Ados A100E, Инструкция по эксплуатации, Страница: 22 / 49

ADOS S.R.L. Buccinasco (MI)
492-MTU10006 Rev. 4 Page 22 of 49
A100E Registers list
Register 0 is a special coded register (see details).
All weigh related registers (gross value, zeroed value, alarm level values and dead band values) are coded
on two consecutive registers as 2’s complement binary value.
Configuration parameters are coded as explained in “Configuration” paragraph.
Registers marked as “ R ” are read only, those marked as “ R/W ” are read-write
Register
Number
Function Type
0 Status word R
1-2 Gross weigh value R
3-4 Tare weigh value R
5 Division R/W
6 Resolution R/W
7 Decimal point position R/W
8 Averages R/W
9 AZM limit R/W
10 MOTION band R/W
11 ZERO tracking limit R/W
12 Primary serial port operating mode R/W
13 Auxiliary serial port operating mode R/W
14 Transmission delay R/W
15 Receiver time out R/W
16 Baud rate R/W
17 Slave address R/W
18 Relay 1 function R/W
19-20 Relay 1 alarm level R/W
21-22 Relay 1 dead band R/W
23 Relay 2 function R/W
24-25 Relay 2 alarm level R/W
26-27 Relay 2 dead band R/W