
BIOS Configuration
•
49
Standby Mode
After the selected period of system inactivity, the fixed disk drive and the
video shut off while all other devices still operate at full speed.
Disabled
<Default>
Don’t Enter the Standby mode
1 Hour
After 1 hour of system inactivity, enter Standby mode
40 min
After 40 min of system inactivity, enter Standby mode
30 min
After 30 min of system inactivity, enter Standby mode
20 min
After 20 min of system inactivity, enter Standby mode
12 min
After 12 min of system inactivity, enter Standby mode
8 min
After 8 min of system inactivity, enter Standby mode
4 min
After 4 min of system inactivity, enter Standby mode
2 min
After 2 min of system inactivity, enter Standby mode
1 min
After 1 min of system inactivity, enter Standby mode
Suspend Mode
When enabled, and after the set time of system inactivity, all devices except
the CPU will be shut off.
Disabled
<Default>
Don’t Enter the Suspend mode
1 Hour
After 1 hour of system inactivity, enter Suspend mode
40 min
After 40 min of system inactivity, enter Suspend mode
30 min
After 30 min of system inactivity, enter Suspend mode
20 min
After 20 min of system inactivity, enter Suspend mode
12 min
After 12 min of system inactivity, enter Suspend mode
8 min
After 8 min of system inactivity, enter Suspend mode
4 min
After 4 min of system inactivity, enter Suspend mode
2 min
After 2 min of system inactivity, enter Suspend mode
1 min
After 1 min of system inactivity, enter Suspend mode
HDD Power Down
When enabled, and after the set time of system inactivity, the hard disk
drive will be powered down while all other devices remain active.
Disabled
<Default>
Don’t Enter the HDD power down mode
1 min ~ 15 min
After the set time of s ystem inactivity, HDD power down
Содержание NuPRO-598 Series
