ADLINK Technology cPCI-6530BL Series, Руководство пользователя

Страница: 71 / 137

Utilities 59
cPCI-6530BL
7 Utilities
7.1 Watchdog Timer
This section describes the operation of the cPCI-6530BL’s watch
dog timer (WDT). The primary function of the WDT is to monitor
the cPCI-6530BL operation and to reset the system if a software
application fails to function as programmed. The following WDT
functions may be controlled using a software application:
X enabling and disabling
X reloading timeout value
The cPCI-6530BL custom WDT circuit is implemented using the
internal IO of the ITE Super I/O IT8783 which is at 2Eh of LPC.
The basic functions of the WDT include:
X Starting the timer countdown.
X Enabling or disabling WDT.
X Enable or disable WDT countdown LED ON.
X Reloading the timeout value to keep the watch dog from
timing out.
X Setting the range of the timeout period from 1 to 15300 sec-
onds.
X Sending a RESET signal to system when the watch dog
times out
Using the Watchdog in an Application
The following section describes the WDT functions in an applica-
tion. The WDT reset function is explained in the previous section.
This can be controlled through the registers in the cPCI-6530BL
Super I/O.
An application using the reset feature enables the watchdog func-
tion, sets the count-down period, and reloads the timeout value
periodically to keep it from resetting the system. If the timer count-
down value is not reloaded, the watchdog resets the system hard-
ware after its counter reaches zero.
For a detailed programming sample, refer to the sample code pro-
vided in the ADLINK All-In-One CD. You may find this in the follow-
ing directory: X:\cPCI\cPCI-6530BL\WDT.