manualshive.com logo in svg

ADIC Scalar AIT 440, Инструкция по установке и эксплуатации

Поделиться
Скачать
ADIC Scalar AIT 440 Скачать руководство пользователя страница 6

Installation and Operation

v

Product Warranty Caution

The Scalar AIT 440/480 Libraries are warranted to be free from defects in materials, 
parts, and workmanship and will conform to the current product specification upon 
delivery. 

For the specific details of your warranty, refer to your sales contract or 

contact the company from which the library was purchased.

The warranty for the library shall not apply to failures of any unit when:

•

The library is repaired by anyone other than ADIC’s personnel or approved 
agent.

•

The library is physically abused or is used in a manner that is inconsistent 
with the operating instructions or product specification defined by ADIC.

•

The library fails because of accident, misuse, abuse, neglect, mishandling, 
misapplication, alteration, faulty installation, modification, or service by 
anyone other than the factory service center or its approved agent.

•

The library is repaired by anyone, including an approved agent, in a manner 
that is contrary to the maintenance or installation instructions supplied by 
ADIC.

•

ADIC's serial number tag is removed.

•

The library is damaged because of improper packaging on return.

                                   CAUTION

Returning the library in unauthorized packaging may damage 
the unit and void the warranty.

If problems with the library occur, contact your maintenance 
organization; do not void the product warranty by allowing 
untrained or unauthorized personnel to attempt repairs.

Содержание Scalar AIT 440














































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды