manualshive.com logo in svg

ADIC Scalar AIT 440, Инструкция по установке и эксплуатации

Поделиться
Скачать
ADIC Scalar AIT 440 Скачать руководство пользователя страница 3

ii

Scalar AIT 440/480

Copyright

Copyright 1998 by Advanced Digital Information Corporation (ADIC). All rights 
reserved. This item and the information contained herein are the property of ADIC. No 
part of this document may be reproduced, transmitted, transcribed, stored in a retrieval 
system, or translated into any language or computer language in any form or by any 
means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, 
without the express written permission of ADIC, 11431 Willows Road N.E., Redmond, 
Washington 98052.

Disclaimer

ADIC makes no representation or warranties with respect to the contents of this 
document and specifically disclaims any implied warranties of merchantability or fitness 
for any particular purpose. Further, ADIC reserves the right to revise this publication 
without obligation of ADIC to notify any person or organization of such revision or changes.

Trademark Notices

ADIC

™

, ADIC Europe

™

 and Scalar

™

 are trademarks of Advanced Digital 

Information Corporation. Sony

®

 is a registered trademark of Sony Corporation. AIT

™

, 

AME

™

 and MIC

™

 are trademarks of Sony Corporation. All other product names are 

trademarks or registered trademarks of their respective companies.

Advanced Digital Information Corporation

11431 Willows Road N.E.

Redmond, Washington 98052

62-0153-01

Содержание Scalar AIT 440














































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды