ADIATEK quartz 66, Использование и обслуживание

Страница: 16 / 23

16
1. Turn on the machine
turning the key clockwise
(2).
2. Keep the button pressed
for a few seconds (3).
3. Turn off the machine.
CLEANING THE BRUSHES
Take off the brushes to clean them with a water jet (to read how to
do it see chapter “DISASSEMBLING THE BRUSHES”).
CLEANING THE SQUEEGEE
Keeping the squeegee clean guarantees always the best drying result.
For its cleaning it is necessary to:
1. Take off the squeegee hose (4) from the coupling.
2. Disassemble the squeegee from its support (1) by loosening the
knobs (2) counterclockwise and making slide the threaded parts
in the appropriate slots up to their release.
3. Clean with care the internal part of the squeegee inlet
eliminating eventual dirt residuals.
4. Clean with care the squeegee rubbers.
5. Reassemble all parts paying attention to put the washers (3) into
position, they are two for each knob, so that they are assembled
one under and the other on each of the two slots present on the
support.
WEEKLY MAINTENANCE
REAR SQUEEGEE RUBBER CHECK
Check the squeegee rubber wearing and eventually turn it or replace
it.
To replace the rubber it is necessary to:
1. Lift u the squeegee
2. Unlock the hooks (1).
3. Unscrew the wing nuts (2) to take off the outer rubber blades (3)
and then the central one (4).
4. Take off the rubber (5) to turn it or replace it.
To reassemble the squeegee do these operations backwards.
CLEANING THE SQUEEGEE HOSE
Weekly or in case of insufficient suction, it is necessary to check that
the squeegee hose is not obstructed. Eventually, to clean it, proceed
as follows:
1. Take off the hose (1) from the squeegee coupling.
2. Wash the inside of the hose with a water jet.
3. To reassemble the hose repeat inversely the above-mentioned
operations.
Do not clean the hose that goes from the suction motor to the
recovery tank.
CLEANING THE SOLUTION TANK
Take the machine to the place assigned for the detergent solution
draining.
1. Unscrew the solution tank cap.
2. Open the detergent
solution valve (1)