ADIATEK quartz 66, Использование и обслуживание

Страница: 15 / 23

15
STOP OF THE MACHINE AFTER CLEANING OPERATION
At the end of the work proceed as follows:
1. Press button (1) to lift up the brushes.
2. Lift up the squeegee using button (2).
3. Take the machine to the place assigned for the water drainage.
DAILY MAINTENANCE
DRAINING AND CLEANING THE RECOVERY TANK
1. Hold the exhaust hose (1) placed on the front part of the
machine after having taken it off from its fixing support.
2. Take off the plug (2) from the exhaust hose acting upon its lever
(3) and empty the recovery tank into appropriate containers, in
compliance with the respective rules what the liquid disposal
concerns.
1. Clean the inside of the tank using a water jet.
CLEANING THE SUCTION FILTER
1. Open the cover (1) and unscrew the knob (2) to release the filter
protection (3).
2. Rotate the filter protection clockwise to release it.
3. Take off the filter and
its protection.
4. Clean with a water jet
especially the bottom
part and the sides of
the filter.
5. Do the cleaning
procedure precisely.
6. Reassemble the filter.
Absolutely do not clean the inside of the recovery tank cover as it
may results in an irreversible damage of the suction motor.
DISASSEMBLING THE BRUSHES
With the brush base lifted up (see chapter “ASSEMBLING THE
BRUSHES”) rotate energically the brushes in order to unlock the
spring button to take them off and clean them with a water jet. In
the picture it shown how to unlock the brushes.
AUTOMATIC DISASSEMBLE OF THE BRUSHES
Put the lever in central position.