Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso
User Manual
PROFINET / PROFIBUS Master - Converter
Document code: MN67604_ENG
Revision 1.001 Page 17 of 33
PROFIBUS DEVICE:
By pressing the “
Add Slave PROFIBUS
” and “
Modify Slave PROFIBUS
” button (or double click above an existent PROFIBUS Slave) from
the “PROFIBUS Network” window (Fig. 4) the “PROFIBUS Device” window appears (Fig. 6).
In this window is possible to:
Set the PROFIBUS Slave ID (“
ID Slave PROFIBUS
”);
Select the Modules present
in the PROFIBUS Slave
from the Available Modules
in GSD file (“
Module
Selection
”);
Modify the User Parameters
(if present) of the
PROFIBUS device (“
User
Parameters
”);
Modify the Parameters (if
present) of the Module
Selected (“
Module
Parameters
”);
Watch Features and
Baudrate supported from
the PROFIBUS device
(“
Capabilities
”);
Select the Sync, Freeze
and Reset of Data Options
(“
Options
”).
Figure 6: “PROFIBUS Device” window
