ADF Web HD67604-A1, Руководство пользователя

Страница: 20 / 33

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso
User Manual PROFINET / PROFIBUS Master - Converter
Document code: MN67604_ENG Revision 1.001 Page 20 of 33
U
SER
P
ARAMETERS
:
The section “User Parameters” is used to modify the parameters of the PROFIBUS slave (Fig. 9).
In this section there are:
The List of all Parameters available for the
PROFIBUS device (“User Parameters”) (Fig.
9, point (1));
The Configuration of all parameters in RAW
(“Parameters in RAW (Hex)”) (Fig. 9,
point(2));
The “ Use Parameter Inserted Manually ”,
enable this option is possible to insert
manually the parameters of Device and also
of the Modules. Using the “
Modify User
Parameters Manually ” button is possible
to insert/modify the parametrization of the
device (and/or modules). For more info see
below. (Fig. 9, point(3));
The admited value for the selected
parameter. It is possible to select the value
desired and confirm it with the “
Apply ”
button. If no value appears in this table, the
“Min Value” and “Max
Value” are the limit of
the parameter. (Fig. 9, point(4));
The “ Apply ” button is used to confirm the
new value of the parameter, the “ Default ”
button is used to load the factory value for
the parameter. In “
New Value ” edit box it
is possible to set the new value. (Fig. 9,
point(5)).
Figure 9: “PROFIBUS Device – User Parameters” window