Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso
User Manual
PROFINET / PROFIBUS Master - Converter
Document code: MN67604_ENG
Revision 1.001 Page 18 of 33
M
ODULE
S
ELECTION
:
The section “Module Selection” is used to select
which Modules are present in the Slave (Fig. 7).
In this section is possible to:
Check the list of the Modules selected
(“Select Modules”) (Fig. 7, point (1)) and the
list of Modules Available in GSD file
(“Available Modules") (Fig. 7, point (7));
Add a Module from the list of GSD file (Fig. 7,
point (6));
Remove a Module from selected list (Fig. 7,
point (5));
Add all Modules present in the GSD file (Fig.
7, point (4));
Remove all Modules from selected list (Fig. 7,
point (3));
Insert a Module not present in the GSD file
(“
Manual Module
”) (Fig. 7 point (2)). For
more info see the section “Manual Module”
below;
Enable the read of configuration directly from
the
PROFIBUS
Slave
(“
Use
module
configuration readed from device
”) (Fig
7, point (8)). If this option is enable the
configuration of the modules is discorded and
the device read the correct configuration
directly to the PROFIBUS slave.
Figure 7: “PROFIBUS Device – Module Selection”
window
