Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso
User Manual
PROFINET / PROFIBUS Master - Converter
Document code: MN67604_ENG
Revision 1.001 Page 21 of 33
By pressing the “
Modify User Parameters Manually
” button from the “PROFIBUS Device” window (Fig. 6) the “Add Module Manually”
window appears (Fig. 10).
In this window is possible to add/modify the User and/or Modules Parameters manually, i.e. writing the configuration of the parameters (in
hexadecimal).
The means of the fields are:
In the field “
Insert the number of User Parameter
” the number
of byte for the parameter have to be inserted;
In the field “
Insert the Configuration of Module (HEX)
” the
configuration of the User and/or Modules Parameters is defined.
The configuration must be write in hexadecimal mode (without
prefix “0x” o “$”).
Note:
The Values inserted in the table must between 00 and FF
Figure 10: “Add/Modify User Parameters Manually” window
