Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
RS485 / RS232 / Ethernet
Document code: MN67038_ENG Revision 2.003 Page 29 of 42
O
PERATING
M
ODALITY
:
T
UNNEL
P
OINT TO
M
ULTI
P
OINT WITH
B
ROADCAST
This mode allows to extend a serial
line based on Master-Slave concept,
where there are more Slave lines
dislocated in different places.
Note:
This modality uses UDP
packets.
The window is divided in two
section, one for Master device and
the other for Slave devices. It is
possible to assign a label to each
device in order to have a name to
use for understand the project to
upload.
The means
of the fields for
“ETHERNET” are:
In the field “
IP Address
”
the
IP
address
of
the
converter is defined;
In the field “
SubNet Mask
”
the Subnet Mask of the
converter is defined;
Figure 5: “Devices Setting” window (Tunnel Point to MultiPoint, Work with Broadcast)
