Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
RS485 / RS232 / Ethernet
Document code: MN67038_ENG Revision 2.003 Page 26 of 42
If the “
Enable Change baudrate on the fly
” is checked, it is possible to change the baudrate, parity and data bits of the serial from
an Ethernet command (see “CHANGE BAUDRATE ON THE FLY” section);
In the field ”
Port
” the port where addressing the command for the Baudrate change is defined.
The "
Active Serial Driver
" button is used to activate the "Serial to Ethernet Connector". For more details go to page 37.
