Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
RS485 / RS232 / Ethernet
Document code: MN67038_ENG Revision 2.003 Page 27 of 42
O
PERATING
M
ODALITY
:
T
UNNEL
P
OINT TO
P
OINT
A mode that allows the extension of a serial line using
a Ethernet network. The two devices in this mode
must be configured in a coherent way in order to
allow the Ethernet communication between them.
The window is divided in two section, one for Device1
and the other for Device2. It is possible to assign a
label to each device in order to have a name to use
for understand the project to upload.
The means of the fields for “ETHERNET” are:
In the field “
IP Address
” the IP address of the
converter is defined;
In the field “
SubNet Mask
” the Subnet Mask
of the converter is defined;
If the field “
Use Gateway
” is checked, in the
field below it is possible to insert the IP
Address of the gateway used for going out to
the net.
Figure 4: “Devices Setting” window (Tunnel Point to Point)
