adept technology GadgetGateway Скачать руководство пользователя страница 19

Страница: 19 / 124

2-9

GadgetGateway Overview

2.4Connectors and Indicators

2.4 Connectors and Indicators

1. Serial/Counsel Setup Port: Interface to the Serial Setup Menus.

2. Ethernet/IP connector: Used to connect the Gateway to an IP network.

3. Ethernet Link Indicator LED: The indicator turns green when the Gateway has a valid

physical connection to the IP network and goes off when there is no connection.

4. Service Pin 1: Service Pin used for installation of the GadgetGateway router.

5. Service Pin 1 LED indicator: The indicator ﬂashes orange when Service Pin 1 is

pressed.

6. Service Pin 2 LED indicator: The indicator ﬂashes orange when Service Pin 2 is

pressed.

7. Service Pin 2: Alternate service Pin used for installation of the GadgetGateway router

when not in Twin Mode. When in Twin mode, service pin used for installing the monitor-
ing application.

8. Power Supply Input: Used to attach the power supply to the Gateway.

9: Power Indicator: The indicator turns red when power is being provided to the Gateway.

10. Orange LED: Reserved for future use.

11. Green LED: Reserved for future use.

12. Network Trafﬁc Indicator: The indicator ﬂashes green when network trafﬁc is detected

on the LON side network.

13. ANSI/EIA 709.1 Interface: Used to connect the Gateway to the LonWorks network.

2.5 Redundant Twin Mode

The Twin Redundancy mode enables two GadgetGateway routers to operate as a redun-
dant pair for high availability applications. This enhanced capability increases reliability

and eliminates some single mode failure sources.

Содержание GadgetGateway





























































































































Результаты поиска

Содержание GadgetGateway

Отзывы:

Похожие инструкции для GadgetGateway

Бренды по названию

Популярные бренды

adept technology GadgetGateway, Руководство пользователя

Результаты поиска

Содержание GadgetGateway

Отзывы:

Похожие инструкции для GadgetGateway

Бренды по названию

Популярные бренды