ADEO Services 3276007287851, Инструкция по эксплуатации

Страница: 57 / 62

57
ADEO Services - 135 Rue Sadi Carnot - CS 00001 - 59790 RONCHIN - FRANCE •
CE
VI. TECHNICAL DATA
VII. PRECAUTION
• The awning must be installed in places where it cannot be impacted.
• The support must be adequ ate for the weight of the blind.
• It must be protected against splashing water and damp places.
• Provide enough space around the awning to avoid any risk of blockage or mechanical stress.
• Make sure you can connect your awning to the cable when the USB connection cable is
connected to the motor.
VIII. MAINTENANCE
•
Disconnect the electric blind from its power supply before doing any maintenance on the
electrical parts.
•
Do not use abrasive or aggressive cleaners, always unplug the connecting cable when cle-
aning the awning. Do not spray liquid on the motor or charger.
•
Clean the remote control with a soft cloth.
PARTS VALUES / SYMBOLS
Tube diameter 25 mm
Motor model DM25LEU/S-1.1/28
Motor voltage DC 5V
Charge voltage DC 5V
Maximum amperage charger 2A
Power 8W
Torque 1.1 Nm
Speed 28 RPM
Amperage 0.94 A
Moisture and dust protection IP20
Motor temperature range (heavy use) -0°C to + 40°C
Motor temperature range (normal use) -0°C to + 40°C
Sound pressure level ≤ 46 dB
Remote control DD2700H 3V battery CRV2450
Transmitting frequency 433.925 MHZ
Transmitting power 10 Millwatt
Operating temperature remote -5°C to + 50°C
Transmission distance outside 200 m
Transmission distance inside 35 m (between two wall)
Charger 100-240V~ / 5Vdc
Electric insulation Class II Double insulation
Electric insulation Class III Very Low voltage
CE Declaration
Symbol for recycling for the battery
Symbol for recycling for the electrical & electronic product &
parts WEEE
Symbol for recycling for packaging