02/25/00
Microsense II Model 5300 Gaging System - 7
Microsense
TM
II Model 5300 Gaging System
Functional Overview
The Model 5300 is a modular, configurable, benchtop gaging system that accepts up to four Model 5130
noncontact capacitive displacement-gaging modules, a single Model 5210 velocity and acceleration module
and a single display module. Rear-panel connectors provide differential analog outputs for all channels,
access to a simple serial digital interface for remote calibration of the 5130 modules and a power-entry
module configurable for all international power standards.
Each Model 5130 module connects to a single capacitive probe and offers high-bandwidth and superior
signal-to-noise ratio. The modules are especially suitable for dynamic measurements such as vibration and
high-speed spindle analysis.
The Model 5210 module connects to channels A & B and provides velocity, acceleration and displacement
of A, B, A+B, and A-B as selected by the operator.
Please refer to the individual sections on the Model 5130 and Model 5210 modules for details on their
operation.
Applications
The Model 5300 gaging system provides noncontact, one- to four-channel measurements suited to a wide
variety of applications. The system can be used to measure values including thickness, step height, dy-
namic diameter variation, concentricity, surface velocity and surface acceleration.
The gage is intended for general purpose industrial applications such as:
n
Inspection/Evaluation of High-Speed Ball, Hydrodynamic or Air Bearings
n
Machine Tool Spindle Performance Evaluation/Monitoring
n
High-Speed PCB Drilling Spindle Evaluation/Monitoring
n
Precision Optics Processing Equipment Evaluation/Monitoring
n
Run-Out/NRRO Motor or Disk Analysis
n
Vibration Analysis
n
Velocity, Acceleration, Flutter and Warp Analysis
n
Non-Contact, Non-Destructive Measurement Applications
n
Computer disk Edge Runout Applications
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
