Taking fewer than three measurements in « » Mode
The measurement sequence can be stopped at any time by pressing the
Start/Stop Button. The device enters standby and remaining measurements are
cancelled. Data from the measured blood pressure can be viewed by pushing
the Memory Button.
Skipping countdown time in « » Mode
The countdown before and between measurements in « » Mode can be
skipped by pressing the Start/Stop Button. When the Start/Stop Button is
pressed during countdown, the device will immediately begin the next
measurement.
The device can be set to standby while a reading result is displayed by
pressing the Start/Stop Button. The device will automatically switch to
standby if there is no operation for one minute.
Cancel remaining measurements at any
time during the measurement sequence.
Skip the countdown time and begin the
measurement.
24
3x
3x
3x
