Initial Setup
Attach power plug to adapter
Select a proper power plug and attach to the power adapter as shown below.
Charge the battery
When using for the first time, charge the battery until the recharge
indicator on the device turns to green.
Refer to page 27 for the section of “Using the power adapter.”
Refer to page 27 for the section “Rechargeable battery.”
Connect the Extension Tubing
The e-sphyg 3 comes with a 140 cm (4.5 foot) extension tube that allows you to
customize the distance between the unit and the patient, depending on your platform
type, or mounting location. The blue connector plugs into the cuff socket on the side
of the monitor; the metal bayonet connects to the cuff.
The extension tubing length is optimized for use with a wall-mount installation or
mobile platform. For desktop use, you may want to shorten the tube. To do so,
remove either connector, trim tube to desired length, and reattach connector.
14
