20
NOTE:
If one of the measurements causes an error message, it will be repeated
one more time. If any additional error occurs, the measurement will be
discontinued and an error code will be displayed.
Expanding the averaged measurement to see the three individual
readings: This function allows you to view the three individual
measurements used to calculate the ADC
®
Averaging Mode
Technology
™
measurement. After taking an averaging mode
measurement turn unit off, hold the Memory button for 3 seconds until
you hear a short beep. (Do not hold the button longer than 7 seconds or
you will delete all the readings in the memory!) Let go of the button and
watch the screen. It will automatically scroll through the three
measurements used in the measurement.
6.6. Reading Measurement Results:
When the measurement has been concluded, a long
beep tone sounds. The measured systolic
and diastolic blood pressure values, as well as
the pulse are now displayed.
The appearance of this symbol signifies
that an irregular heartbeat was detected.
This indicator is only a caution.
NOTE:
We recommend contacting your physician if you see this indicator
frequently. See Section 8 (page 23) for more information.
To prolong the batteries’ life the device switches off automatically if no
button is pressed for 1 minute. Otherwise you can switch it off by pressing
the «
ON/OFF
» button.
6.7. Using the Morning/Evening Hypertension Function (6022N, 6023N
models)
Morning Hypertension usually occurs as a surge in blood pressure upon waking
up; this BP monitor will average readings taken between 4:00am and 11:59am.
Systolic
blood
pressure
Diastolic
Blood
Pressure
Pulse
