Viewing the Stored Values
With the unit off, press the «
MEMORY
» button. The display first shows "3A",
then shows the average of all measurements stored in the unit.
NOTE:
Measurements for each user are averaged and stored separately. Be
certain that you are viewing the measurements for the correct user (with no
time and date shown).
Pressing the «
MEMORY
»
button again displays the
previous value. To view a
particular stored memory,
press and hold the
«
MEMORY
» button to scroll
to that stored reading.
If an irregular heartbeat is detected, the symbol is displayed including
the time and the result of the measurement.
Further information
Measurements should not occur soon after each other; otherwise, the
results will be skewed. Wait for several minutes in a relaxed position,
sitting or lying, before you repeat a measurement.
9.2. Discontinuing a Measurement
If it is necessary to interrupt a blood pressure measurement for
any reason (e.g. the patient feels unwell), the «
ON/OFF
» button
can be pressed at any time. The device immediately lowers the
cuff pressure automatically.
9.3. Delete Memory
Before you delete all memory readings stored, make sure you won’t need to
refer to them at a later date. Keeping a written record is prudent and may
provide additional information for your doctor’s visit.
25
MR30: Value of the last measurement – MR29:
Value of the measurement before MR 30
